TSG Solutions supplies professional restoration equipment to water damage, structural drying and mould remediation businesses across Australia. Trade Select Group runs TSG Solutions from Croydon South in Melbourne, and every machine in the range is built for professional drying and remediation work.
Use this page to find the right equipment for the job, compare the range, and get set up with a trade account for trade pricing.
LGR
Dehumidifiers
Five models, 30 to 70 L/day, all with WiFi monitoring
Air
Movers
Low-profile, centrifugal and axial, 900 to 4,000 CFM
Air Filtration
Devices
H13 HEPA air scrubbers, 800 to 2,000+ CFM
TSG
Consumables
Replacement filters and containment zippers
Popular units from across the range, with full specs on every product page.
Compact and stackable LGR for apartments, single rooms and tight spaces.
- Up to 35 L/day
- Covers 50–126 m³
- 22.5 kg
- 2.7 A power draw
Our highest-capacity LGR, for large losses and high moisture loads.
- Up to 70 L/day
- Covers 100–255 m³
- 39 kg
- 3.5 A power draw
Centrifugal air mover for carpet, underlay and structural drying.
- 1,050 CFM
- 2.3 / 2.7 / 3.2 A power draw
- 14.5 kg
- Carpet clamp included
Axial air mover that moves 4,000 CFM across large open areas.
- 4,000 CFM
- 0.9 / 1.3 A power draw
- 14 kg
- Sealed motor
Portable H13 HEPA air scrubber for residential and light commercial jobs.
- 800 CFM
- Covers up to 200 m³
- 16.5 kg
- 0.7 A power draw
Commercial air scrubber with an oversized HEPA filter and a pressure gauge.
- 1,200 CFM
- Covers 200–370 m³
- 36 kg
- Built-in pressure gauge
LGR dehumidifiers and air movers dry out homes and commercial buildings after burst pipes, leaks, storms and floods.
The centrifugal TS AM15 pushes air into wall cavities, subfloors and under carpet while an LGR dehumidifier pulls the moisture out of the air.
H13 HEPA air scrubbers capture airborne spores and run negative air inside containment, while dehumidifiers keep humidity down.
Air scrubbers fitted with carbon filters remove odours, gases and volatile compounds after fire and smoke damage.
G4 pre-filters and H13 HEPA filters control dust during demolition, with containment zippers for access to the work zone.
Air movers help dry paint, plaster and building materials on construction and renovation sites.
- WiFi monitoring and automatic drain pumps on every LGR dehumidifier
- Air movers that draw from as little as 0.6 A, so more units run per circuit
- H13 HEPA air scrubbers with negative, neutral and positive air modes
- Replacement filters matched to each air scrubber, sold singly or in bulk boxes
- Trade accounts that unlock trade pricing for restoration businesses
- User manuals and warranty support from our Melbourne team
- Professional Water Damage Drying Equipment: What Contractors Need
- How to Build a Job Ready Water Restoration Equipment Package
- Restoration Equipment for Sale: How to Build Capacity Without Buying the Wrong Machines
- Why Dehumidifiers Are Central to Drying Water Damaged Buildings
- Choosing an LGR Dehumidifier for Water Damage: Capacity, Portability and Job Size
- Compact or High-Capacity LGR Dehumidifier? Match the Unit to the Drying Job
- Commercial Water Damage Equipment: Planning for Larger Drying Projects
- Restoration Equipment in Melbourne: Building a Local Water Damage and Drying Fleet
Most restoration businesses start with a drying fleet of LGR dehumidifiers and air movers, which covers the majority of water damage jobs. As you take on mould remediation, fire restoration and commercial work, add HEPA air scrubbers, replacement filters and containment supplies. Our guide to building a job-ready equipment package walks through it.
LGR (Low Grain Refrigerant) dehumidifiers keep removing moisture at lower humidity levels, where standard refrigerant units slow down. That makes them the right tool for drying timber, plaster and concrete after water damage. Compare our LGR dehumidifiers.
An air scrubber, or air filtration device, draws air through a G4 pre-filter and an H13 HEPA filter to capture 99.97% of airborne particles, including mould spores, dust and soot. Our units run negative, neutral or positive air, and the TS AFD 800 and 1200 take carbon filters for odour control.
Low-profile air movers like the TS AM10 and TS AM25 suit everyday drying and tight spaces. The centrifugal TS AM15 directs focused airflow into walls, carpet and subfloors, and the axial TS AM20 moves 4,000 CFM across large open areas. Compare our air movers.
See our equipment guides for water damage, structural drying, mould remediation, fire and smoke restoration, dust control and construction drying.
Yes. Restoration businesses can apply for a trade account. Once you’re approved, you’ll see trade prices whenever you’re logged in.
Trade Select Group runs TSG Solutions from Croydon South in Melbourne, Victoria. Contact our team for help choosing the right equipment.
Yes. You’ll find manuals for our dehumidifiers, air movers and air scrubbers on the user manuals page.
Talk to the Trade Select Group team about the right equipment for your jobs, or apply for a trade account to unlock trade pricing.