New builds and renovations hold a lot of moisture. Plaster, paint, render, screeds and concrete all need to dry before the next trade can start, and waiting on drying times can hold up the whole job.
Air movers speed up evaporation from walls and floors, and LGR dehumidifiers pull that moisture out of the air, even in cool, enclosed spaces.
Combine high-volume air movement with LGR dehumidifiers sized to the space.
Moves 4,000 CFM to circulate air across open floors, warehouses and large rooms.
- 4,000 CFM
- 0.9 / 1.3 A power draw
- 14 kg
- Sealed motor
Low-profile air mover to target walls, corners and freshly finished surfaces.
- 900 CFM
- 0.7 / 0.9 A power draw
- 9.5 kg
- 2 speeds, 3 positions
Quiet air mover for occupied homes and offices during renovations.
- 1,000 CFM
- 0.6 / 0.8 A power draw
- 10.5 kg
- Low-noise operation
Compact LGR for apartments, single rooms and small renovations.
- Up to 45 L/day
- Covers 57–144 m³
- 23.5 kg
- 2.3 A power draw
Upright LGR with large wheels, easy to move around a building site.
- Covers 75–186 m³
- Large wheels for transport
- 35 kg
- 3.1 A power draw
Our highest-capacity LGR, for large new builds and commercial fit-outs.
- Up to 70 L/day
- Covers 100–255 m³
- 39 kg
- 3.5 A power draw
1. Circulate the air
Use axial air movers to move large volumes of air across open floors and rooms, and low-profile units to target walls and corners.
2. Pull out the moisture
Run LGR dehumidifiers to remove moisture released by plaster, paint and concrete, with continuous drainage from the automatic drain pump.
3. Keep the job moving
WiFi monitoring lets you check dehumidifiers without going to site, and stackable units are easy to move between jobs.
Air movers and dehumidifiers used together. Air movers speed up evaporation from plaster, paint and concrete, and LGR dehumidifiers remove the moisture from the air so drying doesn’t stall.
Yes. Lowering the humidity helps plaster, paint and render release moisture, and air movers speed up evaporation from the surface. Always follow the manufacturer’s drying guidance for each material.
The TS AM20 Axial Air Mover moves 4,000 CFM, so it’s built for circulating air across large rooms, warehouses and open-plan floors.
Yes. Our LGR dehumidifiers are rated to operate from 1°C to 36°C, so they keep working in unheated new builds and cool conditions.
Our air movers draw from as little as 0.6 A and our LGR dehumidifiers from 2.3 A, which makes it easier to run several units on site power. Check each unit’s power draw against your circuit capacity.
Yes. Restoration businesses can apply for a trade account to unlock trade pricing across the range. Once you’re approved, you’ll see trade prices whenever you’re logged in.
Talk to the Trade Select Group team about air movers and dehumidifiers for your construction and renovation sites, or apply for a trade account to unlock trade pricing.